.

500W standard COB


  • Battery Li-ion48V / 504Wh
  • Charging time 2,5-3 hours
  • Canister diameter/length 100 mm / 315 mm
  • Canister weight land/freshwater 3.7 kg / 1.3 kg
  • Light head diameter/width 120 mm / 
  • Light head weight land/freshwater 1 kg / 0.5 kg
  • Color temperature 6000-6500 K 
  • CRI >70
  • Lumens 50 000 
  • Depth rating 150 m


Price: €2400 ex VAT

Built on order (Stock lights can be avalible)

500W video light

500W standard COB

with button in the light head


  • Battery Li-ion48V / 504Wh
  • Charging time 2,5-3 hours
  • Canister diameter/length 100 mm / 315 mm
  • Canister weight land/freshwater 3.7 kg / 1.3 kg
  • Light head diameter/width 120 mm / 
  • Light head weight land/freshwater 1 kg / 0.5 kg
  • Color temperature 6000-6500 K 
  • CRI >70
  • Lumens 50 000 
  • Depth rating 150 m
  • Button in light head


Price: €2600 ex VAT

Built on order 

500W video light

Customer customized


  • Battery Li-ion 48V,  10.2Ah / 504Wh
  • Charging time 2,5-3 hours
  • Canister diameter/length 100 mm / 315 mm
  • Canister weight land/freshwater 3.7 kg / 1.3 kg
  • Light head diameter/width 120 mm / 
  • Light head weight land/freshwater 1.25 kg / 0.5 kg
  • Color temperature: Customers choice 
  • CRI 80-95 Customers choice
  • Lumens 50 000-66 000
  • Depth rating 150 m



Build your own professional light by choosing color temperature and CRI level. 


Example:


5700 K, CRI 85, 66 000 Lumens


5700 K, CRI 95, 56 000 Lumens 



Price: €3000 ex VAT.

Built on order



Professional video light

.

Features

Light head


We offer two versions of the lights were the visible difference is in the light head. 


  • Standard cob LED. 6000 K, CRI 70, 50 000 Lumens

  • Custom array, Color temperature and CRI by customer request.


The light head in the picture shows the customized array.


Both versions are equipped with temperature sensor. If the light gets too warm it will shut down.

Custom LED

Battery protection and Safety features


The light has dual over discharge protection. One in the electronics and one in the battery management system.


The one in the electronics is primary. When the voltage in the battery reaches 39V it will lower the effect to 50W allowing the diver to take action before it turns off. 

This way the diver gets a minimum 10 minutes extra to switch the primary light on.

dive light canister

Canister & Charging


The canister has a fully sealed construction, meaning that you as a customer never needs to open any latches and risk damaging o-rings.


Inside the canister you have both the electronics and the battery. Both are sealed in two separate compartmets with the battery in the bottom. 


Since the canister is sealed the charging is done through the same connector as used for the light head. 


Each light is delivered with a 4A charger making it possible to charge from empty to full under 3 hours.

Order or Questions?


- Fill in the form below and send us a message! We will get back to you ASAP!